ING | coplas
COPLAS DISTANCIADORES ESPAÇADORES PLÁSTICOS

Innovative Solutions for the Construction Industry

FOUNDATIONS

MRB

It is a rolling wheel used to centralize the steel reinforcement, guarantee the appropriate concrete cover and slide the reinforcement into the excavation (piles, caisson foundations and slurry walls). MRB has a lock system and it can installed after the assembly of the reinforcement.

CB

Ensure the overlay of cement grout and facilitate sliding and centralization of rebar (anchors), Helps stabilize the ground, ensuring centralization of anchor bolts and the correct overlay of broth cement.

PS

Cover the vertical ends of the rebars and the horizontal ends of the anchoring bars (threaded rod), preventing accidents in the worksite. 

FORMWORK ACCESSORIES AND FINISHING

Locking Systems

Systems for locking parallel formwork. Available models: Formwork clip + Stretcher and Tie rod + Hex nut. They support the pressure of the concrete without sagging. (Metal parts)

Water stop

The Water stop is an auxiliary attachment to the locking system (Tie rod + Hex nut). Suitable for: foundation blocks, reservoirs and water tanks. 

TPF

TPF is a Cap to cover the holes left by the locking system in the formwork; it makes possible to reuse the formwork.

Cone + PVC Pipe + TP

The Cone and Pipe stabilize parallel formwork to prevent the concrete from getting into the locking system, facilitating the removal of the locking system. TP covers the hole left by the cone, excellent aesthetic for finishing.

Dripper

The dripper gives the direction of the rainwater drainage on sill and eaves, eliminating the humidity and stains. Indicated for apparent concrete (houses, buildings, bridges, viaducts, reservoir, etc.). It Guarantees the symmetry and great finishing.

Chamfer strip

The chamfer strip is used to chamfer beams, pillars, stairs and Precast. Easy to install and great finishing. Available in PVC (Rigid profile: 3 meters) and Rubber profile (100 meter roll)

VERTICAL REINFORCEMENT (PILLARS, BEAM SIDE AND PRECAST)

DR

DR is a Wheel plastic Spacer for use in beam sides, pillars and precast. Resistant to compression and it attaches precisely to the steel reinforcement, in gauges from 4.2 to 16.0 mm.

C

C is a Wheel plastic Spacer for use in beam sides, pillars, precast and Concrete Walls. Resistant to compression and it attaches precisely to the steel reinforcement, in gauges from 4.2 to 16.0 mm.

DP

DP is a Wheel Plastic spacer for use in vertical reinforcement: pillars, side beams and precast. It accommodates in specific steel gauges, with variations from 3.0 to 16.0 mm.

HORIZONTAL REINFORCEMENT (SLABS, BEAM BOTTOM, PRECAST)

CP

CP is a Chair type, plastic spacer it guarantees the appropriate concrete cover, supports and positions the steel reinforcement. For use in slabs, beam bottoms and precast. Each side of the CP provides a different cover.

CPP

Guarantees the appropriate concrete cover of welded mesh, the CPP is a Chair type plastic space for horizontal reinforcement and capping of precast slabs. Available for reinforcements of 4.2, at 6.3 mm.

SCI

SCI guarantees the appropriate concrete cover, for heavy reinforcement, supports steel gauges up to 32,0mm in slabs, beam bottoms, foundation (footing and blocks), and precast. It can be used on the sides of the reinforcement by attaching it with a wire.

CE

CE is a Chair type plastic spacer, it guarantees the appropriate concrete cover, supports and positions the steel reinforcement. For use slabs beam bottoms and precast. Each side of the CP provides a different cover.

MA

The MA is a multi-support spacer for use in horizontal reinforcement, such as slabs, beam bottoms, foundation (footing and blocks) and precast. Resistant to heavy loads. It has a connector that allows you to join together more than one product, forming variable lengths.

APC

APC is used to support and position the steel strands for post-tensioning and the negative gaguez reinforcement. Supports steels up to 32.0 mm, available in heights from 50mm to 165mm.

RIBBED SLABS

DB + CI + DI

The CI coupled to the DB forms a set used to position and protect EPS blocks and cellular concrete, calibrating the rib between them, preventing them from moving during the casting of the concrete. Use the DI model to support welded mesh, it does not damage the EPS, due to its flat base.

SLAB LEVELING

Linear Slab leveling set

It provides the accurate levelling of slabs and concrete floors. It prevents the need of an extra concrete layer, because in using our levelling set you can achieve a 0-level slab. It may be used to make recesses in bathrooms and terraces with ease.

PIPE AND CONDUIT POSITIONER

PT

The PT prevents crushing the conduit, preserving the free passage of electrical cables. It attaches to the reinforcement, avoiding pathologies and extra correcting work.

CONCRETE WALLS

DPC +

Expanded Polyethylene Tie

The DPC spacer guarantees the concrete cover and positions the reinforcement steel frame in the center of the formwork in the concrete wall system. Easy to apply, it accurately secures the reinforcement, allowing the concrete to flow between its ribs, completely filling the wall, avoiding pathologies. Allows great finishing. The Expanded Polyethylene Tie prevents the concrete from getting into the wall tie of the formwork, so it can be reused.

GAP

The GAP is a template that increases the speed in the execution of the assembly of the panels, in walls with specific or variable thickness; they exert the gage function in the internal and inferior part of the panels. Suggestion: It can be applied with a gas or gunpowder gun.

GAP M

The GAP M (Multifunctional template) ensures that the walls are positioned precisely one on top of the other, in the different floors, avoiding local eccentricity. It contributes to the correct positioning of the shapes through its guides that act as gauges, guaranteeing the thickness of walls and slabs, avoiding the excess and / or lack of concrete. It allows the centering of the lower steel frame, pointing the reference to next floors.

INDUSTRIAL FLOORING

CTL

The CTL is a spacer used to support and position steels up to 25.0mm. Used in Industrial floors, concrete pavements and uneven subbase (not rigid). It can be applied on grounds with gravel or tarpaulin. Its flat base prevents it from sinking or puncturing the canvas, avoiding pathologies and preserving the hydration of the concrete.

CGB

The CGB is clip-on Chair spacer, its tabs that clip onto the reinforcement steel from 4.2 to 16.0 mm and firmly hold it in place. Used on Industrial floors, concrete pavements and uneven subbase (not rigid). It can be applied on grounds with gravel or canvas. Its flat base prevents it from sinking or puncturing the canvas, avoiding pathologies and preserving the hydration of the concrete.

ST

The ST supports and positions horizontal reinforcements of 6.3 mm. Used on Industrial floors, concrete pavements, surfacing of precast slab cap, uneven subbase (not rigid). It can also be applied on EPS blocks, cellular concrete, and ground with gravel or canvas. Fits at the cross of welded mesh.

APR

El APR es un separador que apoya y posiciona tendónes de postensados y armaduras. Utilizado en pisos, pavimentos de hormigón (concreto) y sub-base irregular (no rígida). Puede ser aplicado en suelos con piedra y lona. Su base lisa impide que hunde o perfore la lona plástica, evitando patologías (pierda de agua). Apoya aceros hasta 20,0mm.

AP

El AP es un accesorio conocido como “pocket former”. Acoplado junto al anclaje, promueve la agrupación de los accesorios con el auxilio de la cuña bipartida, formando el nicho de postensado.

PPC

Tapa plástica con grasa interna, el PPC se utiliza en los extremos de los tendónes para protegerles contra los efectos nocivos de la corrosión.

POST-TENSION

APR

The APR is a spacer that supports and positions Post-Tensioning cables, Rebar, or welded Mesh. Used in floors, concrete pavements and uneven subbase (not rigid). It can be applied on grounds with gravel or canvas. Its flat base prevents it from sinking or puncturing the canvas, avoiding pathologies and preserving the hydration of the concrete. Supports steels up to 20.0 mm.

AP

AP is an accessory known as a pocket former.  It provides a pocket for tensioning the tendon cable, it sets in the right position and connects the plastic tube to the anchor.

PPC

Plastic cap, it contains grease to preserve and protect the tip of the post-tensioning cables from the damaging effects of corrosion.

PRECAST

GT

The GT is spacer indicated to guarantee the appropriate concrete cover and centralize the steel reinforcement in concrete pipes. It fits onto the intersection of the steel reinforcement. With its precise locking system, it holds it firmly in place either in the centrifugal or vibration process.

RL

Suited for concrete poles and piles. It is necessary to install in the wheel during the assembly of the steel reinforcement. The RL centralizes the steel reinforcement and resists vibration during the fabrication of the elements, guaranteeing precision in the covering.

GP

The GP is used to support and position the steel reinforcement, guaranteeing the appropriate concrete cover. Used to support welded mesh in light precast structures, such as precast roofing.

TAN

Hollow-core slab cap, which supports the pressure and prevents the concrete from penetrating the hollow core when joining the slabs together. TAN has a flexible build, which allows it to adapt to a variety of core shapes.

POP • Plastic sleeve

The PΩP is used to isolate the tendon cable, reducing excess of compression, it prevents the concrete from adhering and protects it during application of the release agent.

PMP1 + PMPL

PMP1 and PMPL identify products in warehouses, shelves, fittings, precast elements, etc. Other uses: keychain and sealing wrapping. Available in 5 colors. PMPL is available in grey color, it can be tied with a wire.

  • YouTube Social  Icon

Rua Girassol, 239 - Mauá - SP - Brasil / CEP: 09372-030

Tel.: +55 11 2787 1000 • 0800 709 1216

© 2015 • COPLAS • Todos os direitos reservados.

  • YouTube ícone social
Pavilhão de Espanha
Bandeira de Reino Unido